https://ogma.newcastle.edu.au/vital/access/ /manager/Index ${session.getAttribute("locale")} 5 Development and application of rice starch based edible coating to improve the postharvest storage potential and quality of plum fruit (Prunus salicina) https://ogma.newcastle.edu.au/vital/access/ /manager/Repository/uon:33425 Wed 31 Oct 2018 15:05:14 AEDT ]]> Fabrication of large-area organic photovoltaics using a draw-bar coating technique https://ogma.newcastle.edu.au/vital/access/ /manager/Repository/uon:17017 2 and active layer thicknesses ranging from 35 to 475 nm were produced using the technique. Active layers of 160 nm were the optimum of thicknesses trialled, achieving typical best efficiencies around 0.4 %. Devices with films thinner than 90 nm did not function due to short-circuiting. The draw-bar coating method has the advantage of allowing controlled deposition of a wide range of film thicknesses with no solution wastage.]]> Wed 11 Apr 2018 10:36:13 AEST ]]> Effects of furnace annealing on in situ reacted Ti2AlC MAX phase composite coatings deposited by laser cladding https://ogma.newcastle.edu.au/vital/access/ /manager/Repository/uon:46021 2AlC purity. Aside from a thin oxide layer on the coating surface, a pure Ti2AlC layer was formed immediately below. In total, the coatings were found to exist as seven microstructurally unique sub-layers due to equilibration of supersaturated phases formed during the laser cladding process. No delamination between any layers was observed. The phase identification and microstructure, as determined using XRD, SEM and EDS, are described in detail. Some unique microstructures were observed, including dendritic Ti2AlC MAX phase grains produced from a topochemical reaction between TiCx and TiyAlz regions, and α-Ti supersaturated with up to 33 at.% C. The kinetically trapped phases produced within the coating using this process may offer a strong combination of material properties which could be advantageous for use in extreme environments.]]> Wed 09 Nov 2022 15:31:01 AEDT ]]> Use of hand-spray plaster as a coating for soil bulk volume measurement https://ogma.newcastle.edu.au/vital/access/ /manager/Repository/uon:15160 Wed 04 Sep 2019 11:10:53 AEST ]]> Physicochemical, Microstructural, and Release Profile of Gallic Acid and Hesperetin Rich Phenolic Extract in Polysaccharide and Protein-Based Complex Coatings https://ogma.newcastle.edu.au/vital/access/ /manager/Repository/uon:55512 Tue 04 Jun 2024 20:56:25 AEST ]]> Microstructure and properties of CVD coated on gradient cemented carbide with different WC grain size https://ogma.newcastle.edu.au/vital/access/ /manager/Repository/uon:29276 Sat 24 Mar 2018 07:32:50 AEDT ]]> Combining printing, coating, and vacuum deposition on the roll-to-roll scale: a hybrid organic photovoltaics fabrication https://ogma.newcastle.edu.au/vital/access/ /manager/Repository/uon:24318 Sat 24 Mar 2018 07:14:41 AEDT ]]> Microstructural analysis of in-situ reacted Ti2AlC mAX phase composite coating by laser cladding https://ogma.newcastle.edu.au/vital/access/ /manager/Repository/uon:40763 Mon 18 Jul 2022 14:01:39 AEST ]]> Starch-based films: major factors affecting their properties https://ogma.newcastle.edu.au/vital/access/ /manager/Repository/uon:35108 Fri 21 Jun 2019 10:04:57 AEST ]]> Advances in bioorganic molecules inspired degradation and surface modifications on Mg and its alloys https://ogma.newcastle.edu.au/vital/access/ /manager/Repository/uon:48201 Fri 07 Jul 2023 11:34:28 AEST ]]> Advances in hydroxyapatite coatings on biodegradable magnesium and its alloys https://ogma.newcastle.edu.au/vital/access/ /manager/Repository/uon:48202 Fri 07 Jul 2023 11:13:21 AEST ]]>